Getting Started

Azure Storage Queues Transport Configuration

Configuration parameters

The Azure Storage Queues Transport can be configured using the following parameters:


Defaults: none

Connection string is optional and is used when no client for queue, blob or table is provided.


The amount of time that the transport waits before polling the input queue, in milliseconds.

Defaults: 125 ms


In order to save money on the transaction operations, the transport optimizes wait times according to the expected load. The transport will back off when no messages can be found on the queue. The wait time will be increased linearly, but it will never exceed the value specified here, in milliseconds.

Defaults: 30000 ms (30 seconds)


Instructs the transport to remove any existing messages from the input queue on startup.

Defaults: false, i.e. messages are not removed when endpoint starts.


The visibilitytimeout mechanism, supported by Azure Storage Queues, causes the message to become invisible after read for a specified period of time. If the processing unit fails to delete the message in the specified time, the message will reappear on the queue. Then another process can retry the message.

Defaults: 30,000 ms (i.e. 30 seconds)


The number of messages that the transport tries to pull at once from the storage queue. Depending on the expected load, the value should vary between 1 and 32 (the maximum).

Starting from version 8.1.3 of the transport (and from version 7.5.6 for the 7.x version of the transport), the batch size is dynamically calculated based on the endpoints message processing concurrency limit unless explicitly specified. The batch size is calculated based on the following formula

MaxConcurrencyBatch Size
3232 [max]

If the message processing concurrency limit is higher than the maximum batch size the degree of parallelism is dynamically increased, unless explicitly specified, to fulfill the concurrency needs of the endpoint while avoiding over fetching of messages. This is done to decrease the likelihood of message visibility timeouts.

Versions 7.x to 7.5.5 and 8.x to 8.1.2 default to a batch size of 32.


The number of parallel receive operations that the transport is issuing against the storage queue to pull messages out of it.

Versions 8.1.3 and higher of the transport (or versions 7.5.6 and higher for the 7.x version of the transport) calculate the value at start-up based on the endpoints message processing concurrency limit, using the following formula:

MaxConcurrencyDegreeOfReceiveParallelismBatch Size
50232 / 18
100432 / 32 / 32 / 4
200732 / 32 / 32 / 32 / 32 / 32 / 32 / 8
10003131 x 32 / 8

When the DegreeOfReceiveParallelism is explicitly set, the batch size is dynamically adjusted to fulfill the endpoints message processing limits if possible up to the allowed maximum of 32. For example, with a maximum concurrency set to 100 and a DegreeOfReceiveParallelism fixed to 3 an underfetching of 4 messages might occur. Therefore it is advised to tweak both DegreeOfReceiveParallelism to be in alignment with the BatchSize if required. In most cases, the dynamic calculation should be sufficient and no adjustment is required.

Versions 7.x to 7.5.5, and 8.x to 8.1.2, dynamically calculate the value based on the endpoints message processing concurrency limit, using the following equation:

Degree of parallelism = square root of MaxConcurrency
100032 [max]

This means that DegreeOfReceiveParallelism message processing loops will receive up to the configured BatchSize number of messages in parallel. For example, using a BatchSize of 32 (the default) and parallelism set to 10 will allow the transport to receive 320 messages from the storage queue at the same time.

Changing the value of DegreeOfReceiveParallelism will influence the total number of storage operations against Azure Storage Services and can result in higher costs.
The values of BatchSize , DegreeOfParallelism, Concurrency, ServicePointManager Settings and the other parameters like MaximumWaitTimeWhenIdle must be selected carefully to get the desired speed from the transport without exceeding the boundaries of the allowed number of operations per second.


Messages are wrapped in a transport specific structure containing message metadata. By default, Azure Storage Queues Transport uses the same serializer for the message wrapper as configured for the contained message. It is possible to configure a different serializer for the wrapper using the SerializeMessageWrapperWith option

// serialize the messages using the XML serializer:
var transport = endpointConfiguration.UseTransport<AzureStorageQueueTransport>();
// wrap messages in JSON
All endpoints in the same system must use the same serializer for the message wrapper. This can be achieved by using the same serializer or the above SerializeMessageWrapperWith API.

Setting configuration parameters

Settings can be overridden only using configuration API:

var transport = endpointConfiguration.UseTransport<AzureStorageQueueTransport>();

Native publish/subscribe


To control the subscription table name, use

var transportConfig = configuration.UseTransport<AzureStorageQueueTransport>();


Configure the duration of subscription caching using. The default value is 5 seconds.

var transportConfig = configuration.UseTransport<AzureStorageQueueTransport>();

Or disable caching entirely

var transportConfig = configuration.UseTransport<AzureStorageQueueTransport>();

Connection strings

As of version 9 and above it's recommended to register Queue, Blob and Table clients configured in the desired way instead of providing connection string(s).

Note that multiple connection string formats apply when working with Azure storage services. When running against the emulated environment the format is UseDevelopmentStorage=true, but when running against a cloud hosted storage account the format is DefaultEndpointsProtocol=https;AccountName=myAccount;AccountKey=myKey;

For more details refer to Configuring Azure Connection Strings document.

Using aliases for connection strings to storage accounts

Storage account aliases are enforced by default. The alias is mapped to the physical storage account represented by a QueueServiceClient or a connection string (for backward compatibility).

the default alias is an empty string.

See also Using aliases instead of connection strings for multi-account support.


If a queue name is longer than 63 characters, the Azure Storage Queues Transport will fail to start. The endpoint name would needs to be shortened following the sanitization rules enforced by the Storage queue service.

For more details refer to Sanitization document.


Azure Storage Queues Transport changes the default serializer to JSON. The serializer can be changed using the serialization API.

Related Articles

  • Performance Tuning
    Tips on how to get the best performance from the Azure Storage Queues persistence.

Last modified